Washer game, also known as washer toss, is a popular outdoor game that provides hours of fun and entertainment. If you're looking to bring this game to your backyard, why not build your washer game board? It's a simple and cost-effective DIY project that can be enjoyed by people of all ages. Here's a step-by-step guide to get you started.
1. Gather the materials
To build your washer game board, you'll need two 2×4 boards (48 inches in length), four 4-inch PVC pipe end caps, and a box of washers. You can find these materials at your local hardware store. If you're looking to buy a washer game board then you may click this website.
Image Source: Google
2. Measure and mark
Measure and mark the center of each 2×4 board, both horizontally and vertically. This will help you accurately place the PVC pipe end caps.
3. Attach the PVC pipe end caps
Using a drill and screws, attach the PVC pipe end caps to the center marks on the boards. Make sure they are securely fastened.
4. Paint or decorate the boards (optional)
If desired, you can paint or decorate the boards to make them more visually appealing. Use your creativity and choose colors or designs that reflect your style.
5. Set up the game
To set up the game, place the boards approximately 25 feet apart from each other. Each player stands next to one board and takes turns throwing the washers into the PVC pipe end caps. The goal is to score points by landing the washer in the pipe or on the board.