Wood floor refinishing is a task that many homeowners prefer to hire a professional hardwood flooring company to do. If you prefer to do it yourself you will need to make sure that you set aside enough time, have the right tools, and can pay attention to detail first step is to remove everything from your room refinishing, including all of the carpet, and furniture. By doing this will make it easier to move around the room to make a wooden floor refinishing tasks easier to accomplish. You can find more about flooring companies via www.esspada.com/flooring-suppliers-sydney/hardwood-timber-flooring-sydney/.
The main tool you'll need is a sander but make sure that it is one that you can easily handle. Some people like to use an orbital sander, which is small enough to be hand-held and operated by cable or battery pack. If you are not sure which to get to speak with someone at home improvement stores for their advice. You will also need a shop vacuum cleaner, sandpaper, broom, hammer. You also need a stain on the floor and roller or brush to apply it together with a sealant. sealant can be applied with a roller. To avoid breathing in the dust from sanding and fumes from the stain and sealant you should wear a face mask.
Make sure that if you have a ceiling fan that you turn it off and close all air vents. To help prevent the spread of dust from sanding you can hang something on the entrance to the room. Because most of the work will be done on your knees can also invest in a pair of knee protectors. Once you have all you need now is time to start your hardwood floor refinishing project. When doing hardwood floor refinishing always start at the farthest corner and work backwards towards the door. The first thing to do is sand of stains on the floor, which is what the sander is for. If you have a stubborn spots you can use sandpaper. Once the sanding is done sweeping the floor and finish by using a vacuum shop. The floor must be free from residues before you can stain the floor.
Make sure that you stir the stain before applying it to the floor to eliminate bubbles that can cause the appearance of molted. Use a brush to apply the stain slowly in the direction of the wood fiber. After drying you will need to cover the floor using a roller to apply a uniform thin layer of sealant again in the direction of the grain. Before moving anything back make sure it is completely dry.